The gneiss of ZORA LTD, extracted in the Rhodope Mountain in Bulgaria, is unique and exceptional. It is with rough, extremely tough and resistant to wear and cold. It is manually sliced into thin and tough slabs, which makes it very suitable for exterior tiling and insulation. From an aesthetic point of view this type of tiling and surface adds unique charm to your home, cottage or alley in the garden, as well as the sidewalk, roof or any part of the building you live in. Its colour and hues vary from golden beige to silver grey.
Products
- Home /
- Products
|
golden-beige color |
|
siver-grey color |
Physical and mechanical indices:
| Volume weight |
2.60 t/m3
|
| Water absorption |
0.55%
|
| Compressive strength: | |
|
in dry state |
75.30 MPa |
|
in water saturated state
|
52.80 MPa
|
|
after 25 fold freezing
|
69.80 MPa
|
| Coefficient of wear after Deval |
4.90%
|
| Coefficient of cold resistance |
0.93%
|
Gneiss slabs are offered in their natural shape – polygonal (not cut), as well as cut in regular rectangular and square shapes.
STONE FOR WALLS /BUILDING/
The masonry can be used both for building walls, as well as covering existing walls (stenari).
More...SAWN WALLSTONES /STENARI/
Sawn wallstones – corners and foreheads from masonry with thickness designated by the customer. They are suitable for exterior cladding on an existing wall.
More...GLITZ WALLSTONES – Kokal
Glitz wallstones /Kokal/ – slim clippings, suitable for tiling of ornamental walls with thickness about 25-40 mm. ; width 30-50mm.; lenght 150-400mm. They create effects wall to masonry.
More...SAWN STRIPES
Sawn gneiss strips of wide – 20mm. They can be used especially for interiors. The stripes are offered in four-sided and two-sided sawn.
More...PAVING-STONE
Paving-stone are suitable for outdoor pavement. Available with cut edges and rounded edges. They are sized 100x100mm. and with thickness 20-35mm.
More...SAWN SLATES WITH HAND-BATTERED CONTOUR
These are quadrate sawn slate with hand-battered contour. They can by used for external as well as internal revetment.
More...SAWN SLATES
Sawn gneiss slates are used to revetment, pavement or staircases. They can be made according requirement to clients or the standart size.
More...POLYGONAL SLATES
Polygonals slates – unshaped gneiss plates and tile-stones, sorted by size and gauge thickness .
More...
